Magnumforce Race Car Fabrication Home Page Products

Wilwood Single Piston Calipers

Billet Spot Floater PS 1 Caliper Billet Dynalite Single Caliper
Dynalite Single Floater Caliper Mechanical Spot Caliper Mechanical Spot Caliper Polished

 

wpe28.jpg (45474 bytes)   Billet Spot Floater 

Wilwood’s 1.75" diameter single piston Billet Spot Caliper is ideal for Micro and Mini Sprint, Kart, Off Road, Motorcycle and Street Rod/Drag Race Spindle Mount applications. Designed for light duty use, this 1.2 pound floating caliper holds a round .25" thick, 2.00 square inch brake pad, and accommodates rotors from 6.00" to 13.00" diameter, and widths starting at .12". Maximum rotor width can be adjusted by specific bracket and spacer dimensions. The pads are held in place by stainless steel 10-24 x .38" long flat head cap screw (screws are included), and the caliper is available either black anodized or machine finished.

ORDERING INFORMATION:

Bore Size Disc Width PART NUMBER
1.75"    44,5 mm .12" - .38"    3,0 - 9,6 mm

120-1064

 

 

  Billet Dynalite Single Caliper

wpe2A.jpg (52341 bytes)

Wilwood’s Billet Dynalite Single incorporates all the features of the Dynalite Single II and III calipers, utilizing close tolerance design and manufacturing techniques available in a billet part. The result is the most rigid, lightweight and attractive caliper in the Dynalite Single Series. Internal fluid passage and multiple bleed fittings permits right or left, front or rear mounting options, with either 3.25" or 3.75" lug spacing. The Billet Dynalite Single comes standard with our black anodized coating, but is more spectacular with the optional brilliant polished finish.

wpe2F.jpg (261418 bytes)   Dynalite Caliper Dimensions (Click Image to Enlarge)

  Dynalite Single Floater Caliper

wpe2B.jpg (50806 bytes)

Wilwood’s Dynalite Single Floater is a single piston billet caliper designed for Open Wheel, Drag Race, Karting and Motorcycle applications. The rigid outboard anvil half’s low profile design allows it to fit in tight clearance situations where outboard piston designs will not. Weighing only 1.4 pounds, the caliper uses the same .49" thick, 3.25 square inch Dynalite Single quick change pads. Multiple 1/8-27 NPT inlet and bleed screw locations allow for versatile mounting positions. Caliper comes with precision dry lubricated slide pins for bind-free operation and caliper is black anodized to resist corrosion. Fits rotors from .19" to .38" wide and diameters from 6.00" to 13.00".

Dynalite Single Floater Dimensions  wpe31.jpg (179616 bytes)    (click image to enlarge)

ORDERING INFORMATION:

BORE SIZE DISC WIDTH PART NUMBER
1.75"     44,5 mm .38"    9,6 mm 120-3277
1.75"     44,5 mm .25"    6,4 mm 120-2498

  Mechanical Spot Caliper

wpe2C.jpg (47220 bytes)

Our single piston floating Mechanical Spot Caliper is compact, lightweight and widely used in Parking Brake, Karting, Sport Utility Vehicles and Light Industrial applications. Its two position, cam-actuated lever permits right or left, front or rear mounting, and accommodates two settings for leverage adjustment. The 1.2 pound Mechanical Spot fits rotors with diameters from 6.00" to 13.00", thickness from .25", and is supplied with pads installed. The caliper is available black or polished

Mechanical Spot Caliper Dimensions  wpe20.jpg (150309 bytes)   Click to Enlarge

ORDERING INFORMATION:

Bore Size Disc Width Part Number RH/LH
1.62"   41,33mm .81"   20,6mm 120-2280 RH
1.62"   41,33mm .81"   20,6mm 120-2281 LH
1.62"   41,33mm .50"   12,7mm 120-2373 RH
1.62"   41,33mm .50"   12,7mm 120-2374 LH
1.62"   41,33mm .25"  6,4mm 120-1360 -

  Mechanical Spot Caliper Polished

wpe2D.jpg (38952 bytes)

Our single piston floating Mechanical Spot Caliper is compact, lightweight and widely used in Parking Brake, Karting, Sport Utility Vehicles and Light Industrial applications. Its two position, cam-actuated lever permits right or left, front or rear mounting, and accommodates two settings for leverage adjustment. The 1.2 pound Mechanical Spot fits rotors with diameters from 6.00" to 13.00", thickness from .25", and is supplied with pads installed. The caliper is available black or polished

Mechanical Spot Caliper Dimensions  wpe20.jpg (150309 bytes)   Click to Enlarge

ORDERING INFORMATION:

Bore Size Disc Width Part Number RH/LH
1.62"   41,33mm .81"   20,6mm 120-2280 RH
1.62"   41,33mm .81"   20,6mm 120-2281 LH
1.62"   41,33mm .50"   12,7mm 120-2373 RH
1.62"   41,33mm .50"   12,7mm 120-2374 LH
1.62"   41,33mm .25"  6,4mm 120-1360 -

Back to Wilwood Index

Home     Products     Cars      News     Search

Contact Information

We can be reached directly by phone Monday thru Friday from 10:00 am to 6:00 pm (Pacific time) We ship UPS daily  VISA, MasterCard, Discover, American Express, and PayPal welcome.

Ball91E5.gif (3556 bytes)Telephone - 408-559-6633

Ball91E5.gif (3556 bytes)FAX - 408-559-5283

Ball91E5.gif (3556 bytes)Postal Address - 1436 White Oaks Rd. #7 Campbell CA. 95008 

              ACCEPTED

Send E-mail to gofast@magnumforce.com

Return Policy:  We here at Magnum Force will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available.  In the event an item still needs to be returned please take note of these considerations.

Please call or e-mail us first for a return authorization.  (Perhaps we can find you the correct item instead)

No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.

Returns must be in as new condition in original packaging.

No returns after 30 days.  Items that have been used, installed, modified, or altered cannot be returned.  Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.