Hemi Cuda front
Hemi Cuda Interior
In order for a subframe connector to function properly, it should become an integrated unit with the existing subframe and ideally have minimal bends in it and maximum weld contact area with the existing frame and floor pan. A 2x3 example such as those installed in this Hemi Cuda welds at the front next to the torsion bar mounts and passes through the factory floor pan without affecting seat mounting points and continues through the sheet metal and into the existing rear unibody frame assembly. A subframe connector of inferior size and wall thickness as well as a connector with multiple bends in it will bend and distort excessively, nullifying any advantages that could be accrued from the installation.
1970 Hemi Cuda Subframe Connectors
Telephone - 408-559-6633
FAX - 408-559-5283
Postal Address - 1436 White Oaks Rd. #7 Campbell CA. 95008
Send E-mail to email@example.com
Return Policy: We here at Magnum Force will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available. In the event an item still needs to be returned please take note of these considerations.
Please call or e-mail us first for a return authorization number. (Perhaps we can find you the correct item instead). Packages will not be delivered without this number present.
No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.
Returns must be in as new condition in original packaging.
No returns after 30 days. Items that have been used, installed, modified, or altered cannot be returned. Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.